Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
616
Parameters
Permitted Values
Default
account.1.codec.g726_32.priority = 0
account.1.codec.g726_24.priority = 0
account.1.codec.g726_16.priority = 0
account.1.codec.ilbc.priority = 0
account.1.codec.g723_63.priority = 0
account.1.codec.g723_53.priority = 0
Note: The name of audio codec in this parameter should be the correct one as listed in
the above example, otherwise the corresponding configuration will not take effect.
Web User Interface:
Account->Codec->Audio Codec
Phone User Interface:
None
account.X.codec.<payload_type>.rtpmap
(where <payload_type> should be replaced by
the name of audio codec)
Integer
from 0 to 127
Refer to the
following
content
Description:
Configures the rtpmap of the audio codec for account X.
X ranges from 1 to 16
Valid Audio Codec:
G722.1c(48kb/s), G722.1c(32kb/s), G722.1c(24kb/s), G722.1(24kb/s), G726-16, G726-24,
G726-32, G726-40, iLBC, Opus
Default:
When audio codec is G722.1c(48kb/s),the default value is 121;
When audio codec is G722.1c(32kb/s),the default value is 122;
When audio codec is G722.1c(24kb/s),the default value is 123;
When audio codec is G722.1(24kb/s),the default value is 124;
When audio codec is G726-40, the default value is 105;
When audio codec is G726-32, the default value is 102;
When audio codec is G726-24, the default value is 104;
When audio codec is G726-16, the default value is 103;
When audio codec is iLBC, the default value is 106;
When audio codec is Opus, the default value is 107;
Example:
account.1.codec.g722_1c_48kpbs.rtpmap = 121
account.1.codec.g722_1c_32kpbs.rtpmap = 122