Yealink SIP-T58V/A

Configuring Audio Features
617
Parameters
Permitted Values
Default
account.1.codec.g722_1c_24kpbs.rtpmap = 123
account.1.codec.g722_1_24kpbs.rtpmap = 124
account.1.codec.g726_40.rtpmap = 105
account.1.codec.g726_32.rtpmap = 102
account.1.codec.g726_24.rtpmap = 104
account.1.codec.g726_16.rtpmap = 103
account.1.codec.ilbc.rtpmap = 108
account.1.codec.opus.rtpmap = 107
Note: The name of audio codec in this parameter should be the correct one as listed in
the above example, otherwise the corresponding configuration will not take effect.
Web User Interface:
None
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs via web user
interface:
1. Click on Account->Codec.
2. Select the desired account from the pull-down list of Account.
3. Select the desired codec from the Disable Codecs column and then click .
The selected codec appears in the Enable Codecs column.
4. Repeat the step 4 to add more codecs to the Enable Codecs column.
5. To remove the codec from the Enable Codecs column, select the desired codec and then
click .
6. To adjust the priority of codecs, select the desired codec and then click or .
7. Click Confirm to accept the change.