Yealink SIP-T58V/A

Setting Up Your System
43
Procedure
Web server type can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the web access type,
HTTP port and HTTPS port.
Parameters:
static.wui.http_enable
static.network.port.http
static.wui.https_enable
static.network.port.https
Web User Interface
Configure the web access type,
HTTP port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=network-adv&q=loa
d
Phone User Interface
Configure the web access type,
HTTP port and HTTPS port.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
static.wui.http_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using the HTTP
protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->Webserver Type->HTTP
Status
static.network.port.http
Integer from 1
to 65535
80