Yealink SIP-T58V/A - Page 66

Administrator’s Guide for SIP-T5 Series Smart Media Phones
44
Parameters
Permitted
Values
Default
Description:
Configures the HTTP port for the user to access web user interface of the IP phone using
the HTTP protocol.
Note: Please take care when choosing an alternate port. If you change this parameter, the
IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTP Port (1~65535)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->Webserver Type->HTTP Port
static.wui.https_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using the HTTPS
protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->Webserver Type->HTTPS
Status
static.network.port.https
Integer from 1
to 65535
443
Description:
Configures the HTTPS port for the user to access web user interface of the IP phone using
the HTTPS protocol.
Note: Please take care when choosing an alternate port. If you change this parameter, the
IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS Port (1~65535)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->Webserver Type->HTTPS
Port