Yealink SIP-T58V/A

Configuring Audio Features
657
The RTP status will appear on the web user interface at the path: Status->RTP Status.
To configure RTP status displayed on the touch screen via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of Display Report options on phone.
3. Click Confirm to accept the change.
The RTP status will appear on the phone user interface at the path: Settings->Status->RTP
Status.
To configure the options of the RTP status displayed on the touch screen via web user
interface:
1. Click on Settings->Voice Monitoring.
2. In the Report options on phone block, select the desired list from the Disabled column
and then click .