Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
664
Procedure
Configuration changes can be performed using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure the video codecs to use on a
per-line basis.
Parameter:
account.X.video.<payload_type>.enable
Configure the priority and rtpmap for the
enabled video codec.
Parameter:
account.X.video.<payload_type>.priority
Web User Interface
Configure the video codecs to use on a
per-line basis.
Configure the priority for the enabled
video codec.
Navigate to:
http://<phoneIPAddress>/servlet?m=mo
d_data&p=account-codec&q=load&acc=
0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.video.<payload_type>.enable
(where <payload_type> should be replaced
by the name of video codec)
0 or 1
1
Description:
Enables or disables the specified video codec for account X.
0-Disabled
1-Enabled
X ranges from 1 to 16
Valid Video Codec:
H264, H264HP, VP8
Default:
When video codec is H264, the default value is 1;
When video codec is H264HP, the default value is 1;
When video codec is VP8, the default value is 1;
Example: