Yealink SIP-T58V/A - Page 695

Configuring Security Features
673
Parameters
Permitted Values
Default
phone_setting.emergency.number
String within 99
characters
112,911,110
Description:
Configures emergency numbers.
Multiple emergency numbers are separated by commas.
If the value of the parameter “phone_setting.phone_lock.enable” is set to 1 (Enabled), you
can only allow to dial emergency numbers configured by
“phone_setting.emergency.number”.
Web User Interface:
Features->Phone Lock->Emergency
Phone User Interface:
None
Phone Lock Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 750.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
50
Refer to the
following
content
Description:
Configures a DSS key as a phone lock key on the IP phone.
The digit 50 stands for the key type Phone Lock.
For line keys:
X ranges from 1 to 27.
For programable keys:
X ranges from 12 to 14.
For ext keys:
X ranges from 1 to 3, Y ranges from 1 to 60.
Example:
linekey.1.type = 50
Default: