Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
704
Exporting the Log File to a Syslog Server
Procedure
Log setting can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.c
fg
Configure the syslog mode.
Parameter:
static.syslog.mode
Configure the IP address or domain name
of the syslog server where to export the
log files.
Parameter:
static.syslog.server
Web User Interface
Configure the syslog mode.
Configure the IP address or domain name
of the syslog server where to export the
log files.
Navigate to:
http://<phoneIPAddress>/servlet?m=mo
d_data&p=settings-config&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.syslog.mode
0, 1 or 2
0
Description:
Configures the IP phone to export log files to the local system, syslog server or an FTP/TFTP
Server (provisioning server).
0-Local
1-Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None