Yealink SIP-T58V/A User Manual

Troubleshooting
705
Parameters
Permitted Values
Default
static.syslog.server
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the syslog server when exporting log to the
syslog server.
Example:
static.syslog.server = 192.168.1.100
Note: It works only if the value of the parameter “static.syslog.mode” is set to 1 (Server). If
you change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
To configure the phone to export the system log to a syslog server via web user interface:
1. Click on Settings->Configuration.
2. Mark the Server radio box in the Export System Log field.
3. Enter the IP address or domain name of the syslog server in the Server Name field.
For example, the IP address of your syslog server is 192.168.1.100.
4. Click Confirm to accept the change.
A dialog box pops up to prompt “Warning: Some settings you changed take effect when
you restart your machine! Do you want to reboot now?”. The configuration will take effect
after a reboot.

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English