Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
56
Parameters
Permitted
Values
Default
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->VLAN->WAN Port->Priority
static.network.vlan.pc_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the PC port.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “static.network.pc_port.enable” is set to
1 (Auto Negotiate). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->Active
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->VLAN->PC Port->VLAN
Status
static.network.vlan.pc_port_vid
Integer from 1
to 4094
1
Description:
Configures VLAN ID for the PC port.
Note: It works only if the value of the parameter “static.network.pc_port.enable” is set to
1 (Auto Negotiate). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->VID (1-4094)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->VLAN->PC Port->VID
Number
static.network.vlan.pc_port_priority
Integer from 0
to 7
0
Description:
Configures VLAN priority for the PC port.
7 is the highest priority, 0 is the lowest priority.
Note: It works only if the value of the parameter “static.network.pc_port.enable” is set to
1 (Auto Negotiate). If you change this parameter, the IP phone will reboot to make the