Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
60
Parameters
Permitted Values
Default
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Option(1-255)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->Option
To configure DHCP VLAN discovery via web user interface:
1. Click on Network->Advanced.
2. In the DHCP VLAN block, select the desired value from the pull-down list of Active.
3. Enter the desired option in the Option(1-255) field.
The default option is 132.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.
To configure DHCP VLAN discovery via phone user interface:
1. Tap Settings->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN.
2. Tap the On radio box in the DHCP VLAN field.
3. Enter the desired option in the Option field.