Yealink SIP-T58V/A

Setting Up Your System
59
Procedure
DHCP VLAN can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cf
g
Configure DHCP VLAN discovery
feature.
Parameters:
static.network.vlan.dhcp_enable
static.network.vlan.dhcp_option
Web User Interface
Configure DHCP VLAN discovery
feature.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=network-adv&q=load
Phone User Interface
Configure DHCP VLAN discovery
feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.network.vlan.dhcp_enable
0 or 1
1
Description:
Enables or disables DHCP VLAN discovery feature on the IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Active
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->DHCP VLAN
static.network.vlan.dhcp_option
Integer from 1 to
255
132
Description:
Configures the DHCP option from which the IP phone will obtain the VLAN settings. You
can configure at most five DHCP options and separate them by commas.
Note: If you change this parameter, the IP phone will reboot to make the change take