Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
58
4. Select the desired value (0-7) from the pull-down list of Priority.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click OK to reboot the phone.
To configure VLAN for Internet port (or PC port) via phone user interface:
1. Tap Settings->Advanced (default password: admin) ->Network->VLAN->WAN Port (or
PC Port).
2. Tap the On radio box in the VLAN Status field.
3. Enter the VLAN ID (1-4094) in the VID Number field.
4. Enter the priority value (0-7) in the Priority field.
5. Tap to accept the change.
The phone prompts you to reboot the phone.
6. Tap OK to reboot the phone.
The settings will take effect after a reboot.
DHCP VLAN
IP phones support VLAN discovery via DHCP. When the VLAN Discovery method is set to DHCP,
the IP phone will examine DHCP option for a valid VLAN ID. The predefined option 132 is used
to supply the VLAN ID by default. You can customize the DHCP option used to request the
VLAN ID.