Yealink SIP-T58V/A

Setting Up Your System
63
Web User Interface
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.
Navigate to:
http://<phoneIPAddress>/servlet?m=
mod_data&p=network&q=load
Phone User Interface
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.
Configure the IPv6 static DNS address.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
static.network.ip_address_mode
0, 1 or 2
0
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IP Mode
static.network.ipv6_internet_port.type
0 or 1
0
Description:
Configures the Internet port type for IPv6.
0-DHCP
1-Static IP Address
Note: It works only if the value of the parameter “static.network.ip_address_mode” is set
to 1 (IPv6) or 2 (IPv4 & IPv6). If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface: