Zoom H4N - Playback: <SPEED

1
Press.
2
Select <TOOL> and press.
3
Select <SPEED> and press.
Playback : <SPEED>
099
You can adjust playback speed of the file.
4-05 Playback : <SPEED>
• You can move swiftly to this menu pressing TRACK [3] button on the top
screen of each mode.
• You can set up playback speed between 50% and 150% with increments or
decrements of 5%. (Default; 100%)
• You can move the playback location using [FF] [REW] button.
HINT:
During recording and playback, you cannot make any settings after Step 3 of
<SPEED>.
NOTE:
5
[START PLAYBACK] Press.
or
4
Adjust playback speed.
You can set up playback
speed between 50% and
150% with increments or
decrements of 5%.
Press the [MENU] button for
more than 2 seconds, and start
operation from the top screen.
"Short cut"
Pressing TRACK
on the top screen.
Only on STEREO MODE