Selecting a <MODE>
038
7-2 Selecting a <MODE>
Be sure to select the appropriate mode for your application.
MODE
indicator
STAMINA mode
display here.
Confirmation of the mode
• The current mode is indicated on the FRONT
PANEL by Mode Indicator LEDs.
• The H4n will power up in the same mode it was in
when turned off.
• When booting up for the first time, the default
mode is ‘STEREO’.
HINT:
1
Press.
2
Select <MODE> and press.
3
Select among STEREO, 4CH
and MTR modes and press.
*To engage STAMINA
mode, use the switch
located in the battery
compartment.
STEREO
4CH
MTR
Press the [MENU] button for
more than 2 seconds, and start
operation from the top screen.
To Next Page
Loading...
