Zoom H4N - Edit; Output: <FILE STEREO ENCODE

Edit / Output : <FILE STEREO ENCODE>
113
This function will mix down a 4CH file to a stereo file. The resulting files are stored in the folder in STEREO mode.
5-10 Edit / Output : <FILE STEREO ENCODE>
SELECTING THE FILES…P.104 <FILE SELECT>
ENABLE means to make setting effective.
DISABLE
means to inactivate setting, in other words mix
two files 1:1
Select <STEREO ENCODE>
4
Select <STEREO ENCODE>
and press.
Set up <MIXER>:
You should select to make MIXER
settings effective when you start encoding.
5
Select <MIXER> and press.
6
Select and press.
Ref.
☞
<MIXER>
P.100