Zoom H4N - Effect <EDIT (PRE AMP) >, Editing PRE AMP Modules

Effect <EDIT (PRE AMP) >, editing PRE AMP modules
085
You can edit the PATCH using PRE SET EFFECT.
3-03-4 Effect <EDIT (PRE AMP) >, editing PRE AMP modules
ZNR ICON
EFFECT TYPE: SET THE AMP TYPE
CABINET.EQ.LEVEL. ETC.
PRE AMP MODULE CONDITION
ON / OFF
ICON
7
Select <PRE AMP>and press.
8
Press <ON/OFF> and PRE AMP
module turns on.
ADJUST PARAMETER
Select the desired PATCH and edit it....P084
ADJUST PRE AMP module
9
Select editing PARAMETER
and press.
Ref.
☞
PRE AMP module PARAMETER
P.139
Only on MTR MODE