Zoom H4N - Page 143

Effect types on MTR mode and the parameter
142
(1) POSITION
Before,
After
Selects the insertion position of the EFX module:
"Before" the PREAMP module or "After" the
PREAMP module.
(2) FREQ 1 − 50
Adjusts the modulation frequency.
(3) BALANCE 0 − 100
Adjusts the balance between original sound and
effect sound.
(4) LEVEL 2 − 100
Adjusts the level of the signal after passing the
EFX module.
RING MOD
This effect produces a metallic ringing sound. Adjusting the
FREQUENCY drastic change of sound character.
(1) POSITION
Before,
After
Selects the insertion position of the EFX module:
"Before" the PREAMP module or "After" the
PREAMP module.
(2) TIME 1 − 50
Adjusts the rise time.
(3) CURVE 0 − 10
Adjusts the attack volume change curve.
(4) LEVEL 2 − 100
Adjusts the level of the signal after passing the
EFX module.
SLOW ATK
This effect softens the attack rate of each note, resulting
in a violin playing style sound.
(1) DEPTH 0 − 100
Adjusts the modulation depth.
(2) RATE 1 − 50
Adjusts the modulation rate.
(3) TONE 0 − 10
Adjusts the tone.
(4) MIX 0− 100
Adjusts the level of effect sound mixed to the
original sound.
CHORUS
This effect mixes a variable pitch-shifted component
to the original signal, resulting in full-bodied resonating
sound.
ENSEMBLE
This is a chorus ensemble with three-dimensional move-
ment.
The above 2 effect types have the same parameters.
FLANGER
This effect produces a resonating and strongly undulating
sound.
(1) DEPTH 0 − 100
Adjusts the modulation depth.
(2) RATE
0 − 50,
Ref. P144
Adjusts the modulation rate.
(3) RESONANC -10 − 10
Adjusts the resonance characteristic of the ef-
fect.
(4) MANUAL 0 − 100
Adjusts the frequency range in which the effect
operates.
STEP
Special effect that changes the sound in a staircase pat-
tern.
(1) DEPTH 0 − 100
Adjusts the modulation depth.
(2) RATE
0 − 50,
Ref. P144
Adjusts the modulation rate.
(3) RESONANC 0 − 10
Adjusts the resonance characteristic of the ef-
fect. Adjusts the effect sound envelope.
(2) SHAPE 0 − 10
Adjusts the effect sound envelope.
VIBE This is an automatic vibrato effect.
(1) DEPTH 0 − 100
Adjusts the modulation depth.
(2) RATE
0 − 50,
Ref. P144
Adjusts the modulation rate.
(3) TONE 0 − 10
Adjusts the balance between original sound and
effect sound.
(4) BALANCE 0 − 100
This effect varies the sound like a talking modu-
lator.