ABB ACS880 - Page 469

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
0 / uint16Displays (in integer format) the data received from the
external controller as word 2 of data set 1.
A target for this data can be selected by parameter 62.46
Data set 1 data 2 selection. The value can also be used
as a source by another parameter.
Data set 1 data 2
value
62.96
- / -Data received as word 2 of data set 1.0...65535
0 / uint16Displays (in integer format) the data received from the
external controller as word 3 of data set 1.
A target for this data can be selected by parameter 62.47
Data set 1 data 3 selection. The value can also be used
as a source by another parameter.
Data set 1 data 3
value
62.97
- / -Data received as word 3 of data set 1.0...65535
…………
0 / uint16Displays (in integer format) the data received from the
external controller as word 3 of data set 3.
A target for this data can be selected by parameter 62.50
Data set 3 data 3 selection. The value can also be used
as a source by another parameter.
Data set 3 data 3
value
62.100
- / -Data received as word 3 of data set 3.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 1 of data set 10.
A target for this data can be selected by parameter 62.51
Data set 10 data 1 selection. The value can also be used
as a source by another parameter.
Data set 10 data 1
value
62.101
- / -Data received as word 1 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 2 of data set 10.
A target for this data can be selected by parameter 62.52
Data set 10 data 2 selection. The value can also be used
as a source by another parameter.
Data set 10 data 2
value
62.102
- / -Data received as word 2 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 3 of data set 10.
A target for this data can be selected by parameter 62.53
Data set 10 data 3 selection. The value can also be used
as a source by another parameter.
Data set 10 data 3
value
62.103
- / -Data received as word 3 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 1 of data set 12.
A target for this data can be selected by parameter 62.54
Data set 12 data 1 selection. The value can also be used
as a source by another parameter.
Data set 12 data 1
value
62.104
- / -Data received as word 1 of data set 12.0...65535
…………
Parameters 469