Commissioning via ABB-free@home®
Product manual 2CKA00xx73xxxxx
104
9.3.2 Changing functions
1. If several panels are available, first select the appropriate panel.
2. Tap on the panel that is to be re-configured.
– If only the position of the function or of the control element is to be changed, then the
function can be shifted onto a free area via drag-and-drop.
3. Tap on the drop-down menu on the right edge of the screen of the respective function to
adjust the function method.
4. Tap on the "As primary function" button if the allocated function is to be defined as primary
function.
5. Tap on "Delete" if you want to remove the control element.
To Next Page
Loading...
Need help?
General
