ABB SmartTouch i-bus KNX User Manual

KNX control elements and application parameters
Control "Split Unit Control"
Product manual 2CKA00xx73xxxxx
│
147
10.9.12 Use mode: Heating
Options: Disabled
Activated
The parameter is used to specify whether the heating mode is activated.
10.9.13 Use mode: Cooling
Options: Disabled
Activated
The parameter is used to specify whether cooling mode is activated.
10.9.14 Use mode: Drying
Options: Disabled
Activated
The parameter is used to specify whether the drying mode is activated.
10.9.15 Use mode: Fan
Options: Disabled
Activated
The parameter is used to specify whether the fan mode is activated.
10.9.16 Use horizontal oscillation
Options: Disabled
Activated
This parameter is used to specify whether "Use horizontal oscillation" is activated.
10.9.17 Use vertical oscillation
Options: Disabled
Activated
This parameter is used to specify whether "Use vertical oscillation" is activated.


ABB SmartTouch i-bus KNX Specifications

General

Brand	ABB
Model	SmartTouch i-bus KNX
Category	Touch Panel
Language	English