KNX control elements and application parameters
Application "Internal RTC"
Product manual 2CKA00xx73xxxxx
231
10.24.55 Basic stage cooling
Note
Only available when the "Extended settings" parameter under "Cooling control"
is set on "Yes".
10.24.56 Basic stage cooling — Status object cooling
Options: Deactivated
Activated
This parameter enables the "Status cooling" communication object.
10.24.57 Basic stage cooling — Mode of the control value
Options: Normal
Inverse
The mode of the control value can be used to adapt the control value to de-energised opened
(normal) or de-energised closed (inverse) valves.
– Normal: Value 0 means "Valve closed".
– Inverse: Value 0 means "Valve open".
To Next Page
Loading...
