Operation
Product manual 2CKA00xx73xxxxx
302
12.5.2 Fault and alarm messages
The panel offers protection and information via the notification center. You can view the call
history and information about malfunctions or faults. Message contacts, sensors and their
functionality can be monitored. The messages desired in case of a fault or an alarm can be set
individually (see chapter 8.10.2 “Application "Fault and alarm messages"“ on page 81).
Notice
Depending on the parameterization, only certain functions are available in the
application.
The user can view the call history and messages via the notification center. This application can
also be used to acknowledge, export and delete the messages.
The notification center is called up as follows:
1. Tap on the bell icon at the top right on the main operating page (homepage).
– The application page with the call history and the notifications opens.
Fig. 55: Notification center
Pos. Description
[1] Call history
[2] Fault and alarm messages
[3] Archive
To Next Page
Loading...
Need help?
General
