Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA00xx73xxxxx
88
8.13 Additional tools (functions)
You can call up additional tools or functions of the DCA via the DCA icon bar.
8.13.1 Import
1. Click on "Import" in the DCA icon bar, a dialog window with the following entries appears.
– Import master
– Import structure from terminal file
– Import building structure
Import master
Import of masters of a different panel via stpl file.
1. Select the appropriate file in the dialogue window.
2. Click on "Open".
– The master is imported and can be used in the project.
Notice
The master file must first be exported from a different device.
To Next Page
Loading...
Need help?
General
