KNX control elements and application parameters
Control element "Fan switch"
Product manual 2CKA00xx73xxxxx
143
10.8.9 Display status
Options: User-defined
Standard
No
The parameter is used to specify which status texts are displayed for the individual switching
levels.
– User-defined: User-defined texts are displayed for the individual switching levels. The
following supplementary parameters are available:
Text Off:
Options: <Text for "Off">
The parameter is used to specify the text that is to be displayed when the fan is switched off.
The length of the text is limited to 15 characters.
Note
The following parameter is only available when parameter "Deactivation of
switch-off option" is set on "No".
Text level x (1 - 8):
Options: <Text for switching level>
The parameter is used to specify the text that is sent for the respective level. The length of
the text is limited to 15 characters.
Note
How many "Text level x" parameters are available depends on the setting
of the "Number of levels" parameter.
Text beyond reach:
Options: <Text for "beyond reach">
The parameter is used to specify the text that is displayed when the user-defined texts are
too long. The length of the text is limited to 15 characters.
– Standard: Standard texts are displayed for the individual switching levels. The following
supplementary parameter is available:
Text beyond reach:
Options: <Text for "beyond reach">
The parameter is used to specify the text that is displayed when the standard texts are too
long. The length of the text is limited to 15 characters.
– No: No texts are displayed.
To Next Page
Loading...
Need help?
General
