KNX control elements and application parameters
Control element "RTC control element"
Product manual 2CKA00xx73xxxxx
135
10.7 Control element "RTC control element"
10.7.1 Name of the control element
Options: <Name>
Naming of the RTC control element.
The length of the name is limited to 36 characters.
10.7.2 Function of the control element
Options: Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Temperature (orange)" has been made available for functions of this type.
10.7.3 Additional functions/objects
Options: Deactivated
Activated
The parameter is used to specify whether parameter "Delay time during reading of telegrams
after reset [sec.]" is displayed.
10.7.4 Delay time during reading of telegrams after reset [sec.]
Options: Setting option from 1 - 255 seconds
The parameter is used to specify the number of seconds telegrams are delayed after a reset.
Notice
The parameter can only be set when parameter "Additional functions/objects" is
set on "Yes".
To Next Page
Loading...
Need help?
General
