Commissioning via ABB-free@home®
Product manual 2CKA00xx73xxxxx
91
9.1.1 Add device
1. Tap on the toothed wheel [1] (menu devices, scenes and groups) at the left edge of the
screen.
– The "Building plan" opens.
2. Tap on the round plus icon at the bottom right.
– Menu "Select component" opens.
Fig. 29: Open building plan and list of components (example illustration)
3. Tap on the desired characteristic in the list of components.
– The menu with the available devices, functions and actuators opens.
4. Select the desired device and pull it into the floor plan via drag-and-drop.
Fig. 30: Pulling the device out of the menu bar (example illustration)
To Next Page
Loading...
