KNX control elements and application parameters
"Dimmer" control element
Product manual 2CKA00xx73xxxxx
122
The parameter is used to specify the space of time between two dimming telegrams.
– Value: The following parameters are displayed:
Long operation after ...:
Options: Setting option from 0.3 - 10 seconds
The parameter is used to specify how long the button must be pressed to recognize a long
operation.
Brightness change [%]:
Options: Setting option in % from 1 - 20
The parameter is used to specify in how many stepless steps dimming takes place.
Telegram is repeated every [sec.]:
Options: Setting option from 0.25 - 1.25 seconds
The parameter is used to specify the space of time between two dimming telegrams.
10.3.11 Enable 1-bit communication object "Disable"
Options: Deactivated
Activated
There is the option of temporarily disabling the function via an additional communication object
"Disable".
To Next Page
Loading...
Need help?
General
