KNX control elements and application parameters
Control "Split Unit Control"
Product manual 2CKA00xx73xxxxx
149
10.9.22 Additional mode Use window contact
Options: Disabled
Activated
This parameter is used to specify whether the additional window contact mode is activated.
10.9.23 Use additional Presence mode
Options: Disabled
Activated
This parameter is used to specify whether the additional presence mode is activated.
10.9.24 Enable 1-bit communication object "Disable"
Options: No
Yes
There is the option of temporarily disabling the function via an additional communication object
"Disable".
To Next Page
Loading...
