KNX control elements and application parameters
Application "Door communication"
Product manual 2CKA00xx73xxxxx
185
10.17 Application "Door communication"
10.17.1 Use of door communication
Options: No
Yes
The parameter is used to specify whether an application page is displayed in the panel for the
door communication.
– No: No application page is displayed. No additional parameters available.
– Yes: An application page is displayed. The following supplementary parameters are
displayed:
10.17.2 Page PIN-protected
Options: No
Yes
The parameter is used to specify whether the application page for the door communication is
protected by a PIN code.
– No: The application page is not protected.
– Yes: The application page can only be called up by entering a PIN code. The following
supplementary parameter is available:
PIN code level:
Options: Level 1
Level 2
Level 3
Level 4
Level 5
The parameter is used to specify the PIN code level for the application page.
Note
Details about the PIN code, see chapter 8.6.1 “Basic settings (system
settings) of the panel“ on page 56 or .
10.17.3 Ring tone volume preset [%]
Options: Setting option from 10 - 100
Preset of ringtone volume in percent.
To Next Page
Loading...
Need help?
General
