Safety
Product manual 2CKA00xx73xxxxx
15
2.2 Intended use
The ABB SmartTouch
®
is a KNX touch panel which can be freely programmed. The device
serves as a comprehensive control and message unit for the entire KNX installation as well as
the representation and operation of KNX and free@home standard functions. The touch panel
can be used as terminal device (indoor video station) for communication with the ABB-
Welcome
®
outdoor stations. As part of the ABB-Welcome
®
door communication system it
operates exclusively with the components of this system.
The device is intended for the following:
■
Operation according to the listed technical data
■
Installation in dry interior rooms
■
Use with the connecting options available on the device
The intended use also includes adherence to all specifications in this manual.
2.3 Improper use
Each use not listed in “Intended use“ on page 15 is deemed improper use and can lead to
personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the
device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
■
Unauthorized structural changes
■
Repairs
■
Outdoor use
■
The use in bathroom areas
■
Insert with an additional bus coupler
To Next Page
Loading...
