KNX control elements and application parameters
Application "Presence simulation"
Product manual 2CKA00xx73xxxxx
198
The length of the name is limited to 60 characters.
10.21.4 Delay time up to activation [min.]
Options: Setting option from 1 - 60
The parameter is used to specify the minutes after which the recorded telegrams are played.
10.21.5 Object type 1-20
Options: 1 bit
Value (1 byte)
The parameter is used to specify the object types that are to be recorded via the telegrams.
– 1 bit: Switch, blind, etc.
– Value (1 byte): Dimmer, scene number, etc.
To Next Page
Loading...
Need help?
General
