KNX control elements and application parameters
Control "Split Unit Control"
Product manual 2CKA00xx73xxxxx
151
10.10.5 Value [1 byte 0-255] for heating mode
Options: Setting option from 1 to 255
The parameter is used to set the value for the heating operation.
10.10.6 Value [1 byte 0-255] for cooling mode
Options: Setting option from 1 to 255
The parameter is used to set the value for the cooling operation.
10.10.7 Using fan operation
Options: deactivated
activated
The fan operation is activated when the parameter is activated.
10.10.8 Value [1 byte 0-255] for fan operation
Options: Setting option from 1 to 255
The parameter is used to set the value for the fan operation.
10.10.9 Using dehumidification operation
Options: deactivated
activated
The dehumidification operation is activated when the parameter is activated.
10.10.10 Value [1 byte 0-255] for dehumidification operation
Options: Setting option from 1 to 255
The parameter is used to set the value for the dehumidification operation.
10.10.11 Using automatic operation
Options: deactivated
activated
The automatic operation is activated when the parameter is activated.
To Next Page
Loading...
