ABB SmartTouch i-bus KNX - Type of Display Element - Twilight - Size of the Button; Type of Display Element - Twilight - Unit; Type of Display Element - Brightness; Type of Display Element - CO - Size of the Button

KNX control elements and application parameters
"Display" control element
Product manual 2CKA00xx73xxxxx
│
172
10.13.20 Type of display element — Twilight — Size of the button
Options: 1 column
2 columns
The parameter is used to specify whether the display element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.13.21 Type of display element — Twilight — Unit
Options: Lux
kLux
The parameter is used to specify the unit with which the twilight is displayed in the display
element.
10.13.22 Type of display element — Brightness
Notice
For option "Brightness" of parameter "Type of display element" the same
supplementary parameters are available, such as for option "Twilight".
10.13.23 Type of display element — CO
2
— Size of the button
Options: 1 column
2 columns
The parameter is used to specify whether the display element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.13.24 Type of display element — CO
2
— Unit
Options: Fixed at ppm
The parameter is used to specify the unit with which the concentration of carbon dioxide (CO
2
)
in the air is displayed in the display element.
10.13.25 Type of display element — Moisture — Size of the button
Options: 1 column
2 columns
The parameter is used to specify whether the display element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
