ABB SmartTouch i-bus KNX User Manual

KNX control elements and application parameters
"Display" control element
Product manual 2CKA00xx73xxxxx
│
173
10.13.26 Type of display element — Moisture — Unit
Options: Fixed at %
The parameter is used to specify the unit with which the air moisture is displayed in the display
element.
10.13.27 Type of display element — Air pressure — Size of the button
Options: 1 column
2 columns
The parameter is used to specify whether the display element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.13.28 Type of display element — Air pressure — Unit
Options: Fixed at Pa
The parameter is used to specify the unit with which the air pressure is displayed in the display
element.
10.13.29 Enable 1-bit communication object "Disable"
Options: Deactivated
Activated
There is the option of temporarily disabling the function via an additional communication object
"Disable".


ABB SmartTouch i-bus KNX Specifications

General

Brand	ABB
Model	SmartTouch i-bus KNX
Category	Touch Panel
Language	English