Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA00xx73xxxxx
79
8.9.2 Copy control element
1. Open the "Navigation" tab in the library area.
2. Select an operating page in the tree structure.
– The page is displayed in the work area.
3. Select the control element in the page view.
– A red frame appears.
4. Click in the icon bar of the work area.
5. Click on "Copy".
– The control element is copied with all settings.
6. Select the operating page in the tree structure into which the control element is to be copied.
– The page is displayed in the work area.
7. Click in a free area of the page view with the right mouse button.
8. Click on "Paste".
– The control element is pasted.
8.9.3 Add control element to favourites list
1. Open the "Navigation" tab in the library area.
2. Select an operating page in the tree structure.
– The page is displayed in the work area.
3. Select the control element in the page view.
– A red frame appears.
4. Click in the icon bar of the work area.
5. Click on "Add to favourites".
– The control element is added to the favourites list.
Note
The favourites created here can be used repeatedly on other operating pages in
the DCA. They are called up in the library area via the "Applications" tab and
displayed via "Favourite control elements". A control element can then be pulled
out of the tree structure into an operating page via drag and drop.
To Next Page
Loading...
Need help?
General
