Product Overview
Product manual 2CKA00xx73xxxxx
24
When using the touch panel together with the ABB i-bus
®
KNX, up to 18 functions can be
positioned on one operating page. In connection with a configuration with the ABB i-bus
®
KNX,
a total of up to 25 operating pages with a total of 450 control elements can be configured (the
audio control element occupies at least four function positions). For a configuration via the ABB-
free@home
®
System Access Point, the scope of functions of the ABB-free@home
®
App Next is
used. The device can also be used for fault and alarm messages.
For the integration in a ABB i-bus
®
KNX system the touch panel is configured with the KNX
commissioning tool ETS Touch DCA App, which available in the KNX shop free of charge. The
commissioning tool is embedded in the ETS and allows direct access to group addresses and
flags of communication objects. The control element consists of freely programmable touch
surfaces. For the integration in a ABB-free@home
®
system, the commissioning is carried out via
the Web-based user interface of the System Access Point.
To Next Page
Loading...
Need help?
General
