Operation
Product manual 2CKA00xx73xxxxx
310
The following areas become available:
Pos. Designation Description
[1] Display screen
Setting the brightness of the display via the slider.
Specifying a screensaver.
[2] Sound
Specifying the volume for the following sounds:
■
Click sound
■
Warning sound
■
Fault sound
Also a selection of sounds for different types of
messages can be made.
■ If a micro SD card (SDHC) with suitable sound
files is in the device, select a different sound
from the card via the drop-down menu. The
sound files should have format "mp3". Also
wave files can be used.
Notice
The card must remain inserted in the device for
this function!
[3] Network connections
Adjustment of the network settings. Setup of
access to the Welcome app and the MyBuildings
Portal.
[4] Time and date
Different time and date settings:
■
Time
■
Time zone
■
Date
■
Start of week
[5] Access authorizations
If it was specified in the commissioning software
that the end user can change the PIN code
directly on the device, this page then becomes
visible.
■
Here the PIN code levels can be specified and
adjusted.
[6] User settings
Here the following settings can be made:
■
Language
■
Sensors
■
Door communication
■
Reset options
[7] Video surveillance
Management of the IP and Welcome cameras
(preview, positioning, etc.).
[8] Intercom list
Here all input and output devices (microphone,
telephone) can be configured.
[9] Programming button
Here the programming button for the primary
function is added and set.
[10] Advanced settings Here settings and data can be deleted.
[11] Software update
Via this area the software is updated (see chapter
13 “Update“ on page 324).
[12] About This page provides general system information.
To Next Page
Loading...
Need help?
General
