Acre SPC42 - Page 56

Number Name Description
9 TOP LINE
OF
DISPLAY
In the IDLE state, displays the current date and time. In Programming mode, this line
displays one of the following:
l
The programming feature to be selected
l
The current setting of the selected feature
l
The nature of the current alert during an alert condition. (See Prioritization of
display messages below.)
Prioritization of display messages
Trouble messages and alerts are displayed on the keypad in the following order:
l
Zone
– Alarms
– Tamper
– Trouble
l
Area Alerts
– Fail to set
– Entry time out
– Code tamper
l
System Alerts
– Mains
– Battery
– PSU fault
– Aux fault
– External bell fuse
– Internal bell fuse
– Bell tamper
– Housing tamper
– Aux tamper 1
– Aux tamper 2
– Wireless jamming
– Modem 1 fault
– Modem 1 line
– Modem 2 fault
– Modem 2 line
– Fail to communicate
– User panic
– XBUS cable fault
– XBUS communications fault
– XBUS mains fault
– XBUS battery fault
SPC42/52/53/63 – Installation & Configuration Manual Keypad user interface
© Vanderbilt 2023 56 I-200572
08.12.2023