ADVANTEST R3132 Series User Manual

R3132 Series Spectrum Analyzer Operation Manual
3.3.8 EMC Key (EMC Measurement)
3-34
BBA9106 Corrects for biconical antennas (BBA9106).
EMCO3142 Corrects for bilog antennas (EMCO3142).
User ANT Corr Opens the user-definable correction table, and displays the cor-
rection data list in the User Ant Corr menu.
Insert Line Inserts a line in the cursor position.
Delete Line Deletes the line at the cursor position.
Sort Sorts the frequency data in the table in the ascending order.
Table Init Deletes the data from the table.
Corr Mode ANT/LVL
Toggles between the antenna factor (for the defined correction da-
ta) and the level correction data settings.
ANT: Sets the antenna factor, and automatically sets the unit
used for the vertical axis to dBµV/m.
LVL: Sets the level correction data, and sets the unit for the
vertical axis to the level you have previously chosen.
Any other antenna factors than those chosen by the
user are considered invalid, so the displayed unit will
automatically be dBµV/m.
Corr OFF No longer uses the correction data.
Sound Displays the Sound menu, and demodulates the sound at the
marker.
Sound AM/FM Toggles between AM and FM demodulation.
Volume Allows you to set the demodulated sound volume. The volume
can be set from a range of 1 to 12.
Marker Pause Time Allows you to set the duration of the pause used during demodu-
lation.
Squelch ON/OFF Toggles the squelch function on or off.
ON: Displays the squelch marker which indicates that the
sound carrier level below this level is not demodulated. The
squelch level can also be changed.
OFF: Removes the squelch marker, and turns off the squelch
function.

ADVANTEST R3132 Series Specifications

General

Brand	ADVANTEST
Model	R3132 Series
Category	Measuring Instruments
Language	English