ADVANTEST R3132 Series User Manual

R3132 Series Spectrum Analyzer Operation Manual
3.3.28 TRACE Key (Trace Data)
3-77
3.3.28 TRACE Key (Trace Data)
This section describes Trace A(B) menu (1/2) displayed when the
TRACE
key is pressed.
Write A(B) Sets the Write mode which updates the data in the A(B) memory
for each sweep.
View A(B) Sets the View mode which holds the data in the A(B) memory.
Blank A(B) Sets the Blank mode which erases the trace.
Max Hold A(B) Executes the Max Hold mode which displays the maximum value
for each trace sample (when you select the Max Hold mode, the
positive mode is automatically selected. Refer to Posi.)
Detector Displays the Trc Det A(B) menu from which you can set the de-
tection mode used.
Normal Sets the normal mode which automatically detects positive or
negative peak points for each trace point.
Posi Sets the positive peak mode (when you select the Max Hold
mode, the positive mode is automatically selected. Refer to Max
Hold A(B).)
Nega Sets the negative peak mode (when you select the Min Hold
mode, the negative mode is automatically selected. Refer to Min
Hold A(B).)
Sample Sets the sample mode.
Trc Menu A/B Toggles between trace A and trace B.
1/2_more Displays the Trace A(B) menu (2/2).
AVG A(B) Displays the AVG A(B) menu.
AVG A(B) ON/OFF Toggles the averaging function on or off.
ON: Turns averaging on.
OFF: Turns averaging off.
Average PSE/CONT Toggles between PSE (pause) and CONT (continue) while the av-
eraging function is being used.
PSE: Temporarily pauses averaging and displays the current
averaging count.
CONT: Resumes averaging from the point at which the pause
occurred.

ADVANTEST R3132 Series Specifications

General

Brand	ADVANTEST
Model	R3132 Series
Category	Measuring Instruments
Language	English