ADVANTEST R3132 Series User Manual

R3132 Series Spectrum Analyzer Operation Manual
4.2.9 GPIB Command Codes
4-43
Table 4-17 Save Recall
(*1) Add FD: or RAM: to the file name to explicitly indicate a drive name.
(Example) Write a file name such as FD: FILE00.DAT and RAM: REG00.DAT. (.DAT can be
omitted.)
(*2) n = Save/Del/Recall number
A value of 0 to 99 can apply to n.
(*3) (Available when the TG option is installed.)
(*4) Enabled if the external mixer is installed.
Function Listener Code
Talker Request
Code Output Format
Save Reg. SVn (*2) ––– –––
Save File SV File name (*1) ––– –––
Delete Reg. DELn (*2) ––– –––
Delete File DEL File name (*1) ––– –––
Recall Reg. RCn (*2) ––– –––
Recall File RC File name (*1) ––– –––
Save Item Setup ON
Setup OFF
SVSET ON
SVSET OFF
SVSET? 0:OFF
1:ON
Trace ON
Trace OFF
SVTRC ON
SVTRC OFF
SVTRC? 0:OFF
1:ON
Antenna ON
Antenna OFF
SVANT ON
SVANT OFF
SVANT? 0:OFF
1:ON
Normalize ON
Normalize OFF
SVNRM ON
SVNRM OFF
SVNRM? 0:OFF
1:ON (*3)
Limit Line 1 ON
2 ON
1/2 ON
OFF
SVLIM 1
SVLIM 2
SVLIM 3
SVLIM ON
SVLIM OFF
SVLIM? 0:OFF
1: 1 ON
2: 2 ON
3: 1/2 ON
Loss:Freq ON
Loss:Freq OFF
SVOLSS ON
SVOLSS OFF
SVOLSS? 0:OFF
1:ON (*4)
Level ON
Level OFF
SVLVL ON
SVLVL OFF
SVLVL? 0:OFF
1:ON
Channel ON
Channel OFF
SVCH ON
SVCH OFF
SVCH? 0:OFF
1:ON
Spurious ON
Spurious OFF
SVSPR ON
SVSPR OFF
SVSPR? 0:OFF
1:ON

ADVANTEST R3132 Series Specifications

General

Brand	ADVANTEST
Model	R3132 Series
Category	Measuring Instruments
Language	English