Aeonmed Aeon8800A - Cleaning, Disinfection, and Sterilization Cycle

7.Cleaning, disinfection, and Sterilization
115
Anaesthetic
Workstation.
Flow knob
○
APL valve
○
Handle
○
Safety guide rails on
both sides
○
Casters
○
Cable
○
Accessory
surface
Breathing bag
○
Support arm
○
Breathing
system
CO
2
absorber canister
○
○
○
○
Breathing system
Integrated module
○
○
○
○
Bellows cover
○
○
○
○
Folding bag
○
○
○
○
U-ring
○
○
○
○
Bellows base
○
○
○
○
O-ring
○
○
○
○
One-way valve
○
○
○
○
APL valve
○
○
○
○
Pressure gauge
○
NOTE: Read user manuals of AGSS, breathing hose, negative pressure suction device,
and auxiliary flowmeter for reprocessing methods.
7.3.5. Cleaning, disinfection, and sterilization cycle
Table 7-5 Cleaning, disinfection, and sterilization cycle
Recommended
frequency
Maintenance
After use
Cleaning external surfaces.
Daily
Clear the water in the CO
2
absorber canister and replace the
absorbent in the CO
2
absorber canister.
As needed
Cleaning external surfaces.
Clean the CO
2
absorber canister and replace the absorbent in
the CO
2
absorber canister.