EasyManua.ls Logo

Aeonmed Aeon8800A - Product Description; Safety Information; Warnings

Aeonmed Aeon8800A
183 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.Product description
1
1. Product description
1.1. Safety information
1.1.1. Warnings
Please read and adhere to all the WARNINGs, CAUTIONs, and NOTICEs listed below and
attached in their corresponding chapters throughout this manual.
WARNING: Statement gives important information that, if ignored, could lead directly
to personal injury and death.
WARNING: Statement gives important information that, if ignored, could lead directly
to damage to equipment and other property.
WARNING: Aeon8800A must only be operated by trained, skilled medical staff.
WARNING: Aeon8800A Anaesthetic Workstation must and can only be serviced by
Aeonmed’s authorized service representatives.
WARNING: For a full understanding of the performance characteristics of this
equipment, the user should carefully read this manual before operating:
All system connections.
All WARNINGs and CAUTIONs.
How to use the Anaesthetic Workstation.
How to test the Anaesthetic Workstation.
WARNING: Do the following things before operating Aeon8800A:
Finish all the tests listed in Pre-use Preparation.
Test other systematic parts.
WARNING: Do not use the machine if any test failures. Contact Aeonmed’s authorized
service representative for maintaining the machine.
WARNING: The Aeon8800A is not suitable for use in a magnetic resonance imaging
MRIenvironment.
WARNING: To avoid the risk of electric shock, this equipment must only connect to a
supply main with protective earth.
WARNING: The highest attitude of Aeon8800A Anaesthetic Workstation is 3000m.
WARNING: The pipeline inlet pressure of the Aeon8800A Anaesthetic Workstation must
be within 280-600kPa.
WARNING: Breathing tube, mask, SUCTION filter, adapter of mainstream CO
2
module,
etc. are disposable accessories. Check the state of the above accessories before use
to avoid repeated use.
WARNING: When the suction flow is insufficient, the suction port filter should be
checked or replaced.
WARNING: Do not use anti-static and/or electric breathing tubes or masks; otherwise,
they will be flammable near high frequent surgery equipment.

Table of Contents