Clean, disinfect or sterilize the coil breathing circuit.
Clean and disinfect the Anaesthetic Workstation according to the
frequency of use.
7.4. Disassemble the breathing system
7.4.1. Disassemble the bellows
Read all content in this section before disassembling, cleaning, disinfecting, and re-assembling
the bellows to avoid equipment malfunction and patient injury.
7.4.1.1. Disassembly
The bellows dome is a transparent cover with graduation
marks from 300 to 1500.
Remove the bellows dome by turning it counterclockwise and
lifting it away from the breathing system.
Detach the bellows from the base plate.
To Next Page
Loading...