Aeonmed Aeon8800A - Disassemble the Bag Arm; Disassemble the CO Absorber Canister with Bypass

120
7.4.4. Disassemble the bag arm
7.4.4.1. Disassembly
It is not necessary to remove the bag arm to clean it, However, if
removal is desired, turn it counterclockwise, loosen the fixing nut
and then remove the bag arm from the breathing system block.
7.4.4.2. Assembly
Reassemble the bag arm to the breathing system.
7.4.5. Disassemble the CO
2
absorber canister with bypass
7.4.5.1. Disassembly
Push the bypass button.