COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Figure 34: Roadmap selection
After selecting a roadmap, the driver is invited to select a trip to be driven among the ones composing the
roadmap (Figure 33).
Finally another way for selecting the service to be executed is represented by the direct selection of a single
trip. The procedure is started by pressing “Trip” button on TC-430™ main screen or by selecting “Menu
Service menu
Select trip”.
If the current data file being used by the system defines at least a calendar (see [1] or [3] for further details)
then the list of active trips (that is trips linked to a calendar which is active at the time of the trip selection) is
shown on screen (Figure 35).
Figure 35: Active trips selection
While reviewing the list of active trips it is possible to switch to full manual route/path/trip selection by
pressing button “All”.
If no calendars have been defined within the current data file (or if “All” has been presented in the screen
show in Figure 35) then trip is selected by navigating the objects hierarchy “Routes
Paths
Trip” (see [1]
for further details), so the first element to be selected is the route the desired trip belongs to (Figure 36).
To Next Page
Loading...
Need help?
General