COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Figure 32: Workshift selection
Workshifts are listed by “time proximity”, the nearest one being selected by default. However selection can
be filtered/sorted by code and/or description using buttons “Code” and/or “Descr” and typing the part of the
code/description to filter for using the TC-430™ keyboard.
When a workshift is selected, the view is exploded into the trips composing the workshift (Figure 33).
Figure 33: Service trip selection
Trips are also listed by “time proximity”, the nearest one being selected by default. Once a trip is selected,
the screen turns into the navigation mode (Figure 39).
Alternatively, the service to be executed can be represented by a roadmap. In such a case the selection is
performed by pressing the “Roadmap” button on TC-430™ main screen or by selecting “Menu
Service
menu
Select roadmap”.
Roadmaps list is presented on screen (Figure 34).
As usual the roadmaps list can be sorted/filtered by code/description by pressing the “Code”/“Descr” buttons
and by using the TC-430™ keyboard.
To Next Page
Loading...