2D-LC User Guide 79
4Installation
Hardware Installation
Figure 36 Setup C. Recommended setup if
1
D column is hosted in an Integrated Column
Compartment (ICC).
Number of
Capillary
# Connection L x ID [mm] P/N Description
C1 1 Injection Valve to ICC 0.12x105mm 5500-1238 Capillary ST 0.12x105 SL/SL
(provided with ICC)
C2 1 Heat exchanger out to column
(InfinityLab Quick Connect Fitting)
0.12x280mm 5500-1170 Capillary ST 0.12x280 (must
be purchased separately)
81
2
D column (in
2
D MCT) to
2
D DAD
280 x 0.12 5067-4651 Capillary ST 0.12x280
SL/SX (part of 2D-LC
capillary kit)
For all other capillaries / connections, please refer to Figure 31 on page 73, Figure 32 on page 74, and Figure 33 on page 75.
To Next Page
Loading...
Need help?
General
